Das Festplattenlicht des Advantech-Industriecomputters 610L leuchtet nicht
Release-Zeit:2023-05-12 11:10:20
Hard disk fault: The hard disk may be faulty, causing the hard disk indicator to be off. You can try to restart the computer. If it still does not light up, check whether the hard disk is recognized by the computer or try to replace the hard disk.
Bad disk connection: An off disk indicator may be caused by a bad disk connection. You can check whether the power supply and data cable of the hard disk are properly plugged in, or replace the data cable to try to solve the problem.
Hard disk indicator fault: The hard disk indicator may be faulty. You can try to replace the lamp, or contact after-sales technical advice for repair.
In short, if the disk indicator is off, you are advised to check whether the disk works properly and whether the disk connection and indicator are damaged. If the problem cannot be solved, you can contact the sales and after-sales technical consultation for consultation and maintenance.
-
202301-17
Installations- und Inbetriebnahme von ABB-Roboterzubehör
Allgemeine Schritte für die Installation und Inbetriebnahme von ABB-Robotern:1. Heben Sie den Roboterkörper und den Schaltschrank an seinen Platz2. Kabelverbindung zwischen ABB-Roboterkörper und Sc···
-
202308-31
Was sind die Anwendungen von CASAPPA-Synchronmotoren?
1, als Durchflussverteilungsvorrichtung, entsprechend den Systemanforderungen, um den Ausgangsstrom der Pumpe zu verteilenWenn die Welle mit mehreren Gleitlagersätzen ausgestattet ist, muss sicherges···
-
202309-22
WEINVIEW touch screen response slow inspection method
1, view the appearance of the WEINVIEW touch screen: Observe whether there is dirt, fingerprints or scratches on the appearance of the WEINVIEW touch screen, which may affect the sensitivity and accur···
-
202212-30
[Gongboshi Fall] elektrische Schaltschrank Box Schweißen - Doktor der Technik unabhängige Marke zu helfen, Kunden intelligente Upgrade-Produktionslinie
Schweißen von elektrischen SchaltschränkenIn diesem Fall wird der Schweißroboter mit dem Doctor of Engineering-Roboterpositionierer und der Pistolenreinigungsstation kombiniert, um das automatische···
-
202302-13
Unterschied zwischen Mitsubishi PLC-Quellentyp und Leckagetyp
Mitsubishi PLC Split Source Typ (PNP) oder Leck Typ (NPN), die folgenden ist ihr Unterschied1: Lecklogik: Wenn Strom aus der Signaleingangsklemme fließt, wechselt das Signal zu ON, was auf eine Leckl···