So wählen Sie das Omron-Relais aus
Release-Zeit:2023-02-10 15:53:45
1, select the rated working current of electromagnetic relay coil: DC electromagnetic relay driven by transistor or integrated circuit, the rated working current of the coil (generally 2 times of the suction current) should be within the output current range of the driving circuit.
2. Select the contact type and contact load of electromagnetic relay: the same type of relay usually has a variety of contact forms for selection (electromagnetic relay has: single group contact, double group contact, multi-group contact and normally open contact, normally closed contact, etc.), should choose the contact type suitable for application circuit.
3. Select electromagnetic relay coil power supply voltage: When selecting electromagnetic relay, the first thing to choose is whether the relay coil power supply voltage is AC or DC. Generally, the rated working voltage of a relay should be less than or equal to the operating voltage of its control circuit.
4, choose the appropriate volume of electromagnetic relay: the size of the Omron relay volume is usually related to the size of the Omron relay contact load. The size of the relay should be selected according to the requirements of the application circuit.
-
202212-29
Die Zusammensetzung der Konfigurationssoftware der eingebetteten Kunlun MCGS-Version
Das von der eingebetteten MCGS-Version generierte Benutzersystem besteht aus fünf Teilen: Hauptsteuerungsfenster, Gerätefenster, Benutzerfenster, Echtzeitdatenbank und Betriebsstrategie.1, das Haupt···
-
202301-12
Delta PLC maintenance knowledge introduction
1. Delta PLC Power-on Lauflicht ist nicht an, ERROR flackert, die mögliche Ursache ist: kein Programm2. Delta PLC kann nicht mit dem Computer kommunizieren, was sein kann: RS23 ist schlecht3. Wenn di···
-
202212-29
Wartungsschritte für Delta-Frequenzumrichter
Zunächst muss bei der Reparatur des Frequenzumrichters geprüft werden, ob das Geräusch beim Betrieb des Motors anormal ist, einschließlich der Frage, ob es beim Betrieb des Motors sensationell ist···
-
202301-31
Delta-Überlastauslöser-Fehlerlösung
1. Die Hauptursache für VFD-Überlastung(1) Mechanische Überlastung. Das Hauptmerkmal der Überlastung ist die Motorheizung, die durch Ablesen des Betriebsstroms auf dem Bildschirm ermittelt werden ···
-
202306-01
The main function and composition of the configuration software of MCGS Tong - state embedded edition are introduced
Die Hauptfunktion der eingebetteten Konfigurationssoftware MCGS1. Einfache und flexible visuelle Bedienung Schnittstelle: alle chinesischen und visuellen Entwicklung Schnittstelle angenommen wird, die···